TIPS

· Hydradaptor is a powerful cleaning apparatus. Do not use it to pressure wash damaged grout as this tool can create more damage. Grout should be in good condition and completely intact with no cracks or space in between tiles. It is not recommended but may be possible to use more than 3000 PSI on grout with our standard 40-degree spray nozzle. Test an inconspicuous area if possible. Click here for more tips. The end user is responsible for determining suitability in any application.

· This apparatus is intended to assist you with cleaning. Using it alone may or may not achieve the results you are looking for. Pretreat heavily soiled areas. Using towels (large and small) for wiping and extra containment will make cleanup much easier. A cleaning brush, mop, and various cleaning products may simplify any cleaning project.

· This apparatus works best by using two hands and applying controlled, equal force to contain the high-pressure water. There is technique involved for tool control to achieve the best results for maximum efficiency. TIP: Release the trigger handle before lifting from surface, allowing the tool and vacuum to fully contain and remove soiling. Practice and patience should be exercised.

· Electric pressure washers may be connected to indoor sinks with a faucet adaptor which allows connection to 3/4 inch garden hoses. For harder to reach areas, use a hose coupler to run extra lengths of hose and consider other points of entry such as a window.

· This tool can remove painted color sealer from grout or glazing from tile. Resealing in these circumstances is recommended to achieve the look you are working towards. 

· Some upholstery is 'dry clean' only. Look for a tag with an "S" to identify solvent (dry cleaning), "W" for water, or "W/S" for water or solvent. If no identification tag is visible, test fabric in an inconspicuous area and see how it dries. Using warm water, powerful vacuum, fans, and dehumidifiers can speed up the drying time. Flip cushions on end and rotate them for equal drying. WARNING: Mold and mildew can germinate on damp surfaces after 24 hours. Dry fabrics as quickly as possible.

· Using a hose filter (not included) is recommended to prevent the nozzle from clogging. If debris clogs or restricts water to properly stream from the nozzle, using a pin may clear out restrictions. CAUTION: Never squeeze trigger with your hand inside or over the mouth of this accessory.